Call 1-844-395-2200 for How to Fix Dell Printer Error 010-377

Dell Printer Error 010-377 comes due to Fuser failure and to deal with this error you have to remove, check and reseat the Fuser Unit with the following steps give below:

Step 1: Switch the printer power off.

Step 2: Remove the fuser unit from the device.

Step 3: Check the connector on the fuser unit for damage.

Step 4: Check the printer side connector for damage.

Step 5: Here if the error occurs again even after replacing the fuser, check the part number matches the old part.

Step 6: Reseat the fuser and switch the printer back on to check the error if comes again.

Call 1-844-395-2200 to Fix Dell Printer Error 010-377

If this error is not going from your Dell printer, call at this toll-free number and get online support by the experts to fix error after complete diagnosis of the device to take corrective action. Dell Contact Number is also open 24-hour to assist users and solve their technical problems with Dell computers and printers.